BALL LOCK CLAMPING RECEPTACLES Anemo Engineering

Ball Lock Clamping Receptacles Imao Anemo Engineering
https://www.spanclamps.com/receptacles
[email protected]
Technical Information
・Heat resistance 180℃
・Mechanical Strength

Shear Strength 1800N
Tensile Strength 1800N
(at active safety lock)

How To Operate Safety Lock
Turn in the arrowhead direction pushing the locking knob.
Note: To release the safety lock, follow the steps back

How To Check Safety Lock
When the mark lines on the end of the locking
knob are aligned, the safety lock is active.

How To Install (Standard)
For installation in a subplate of thickness ranging from 6mm to 10mm, use a nut for fastening.

How To Install (Safety Lock)
For installation in a subplate of thickness ranging from 6mm to 10mm, use a nut for fastening.
For installation in a subplate of thickness ranging from 10mm to 32mm, use a screw-in method.
6mm 10mm

How To Install (Ball-Lock Clamping Pins)
Accuracy
Plate thickness should be 6mm or more

Veurnestraat 4F
B - 8691 Leisele
BELGIUM

T +32 58 51 53 01
F +32 58 51 82 00

[email protected]