Spraying Epifanes Polyurethane Gloss | The Stapley Boat Restoration Pt4

In this video I cover my painting process for the hull on the Stapley, a 1971 wooden Ski race boat that I am currently restoring.

Below is a list of the process in order:
- Seal bare wood with CPES, (Smiths Clear Penetrating Epoxy Sealer), 3-4 coats: https://www.makewoodgood.co.uk/produc...
- Fillet and shape spray rails with West Epoxy thickened with 407 low-density filler
- Sand, shape and fair with 80g rigid sanding board
- Re seal with CPES, 2 coats
- 1 coat, SML High Build Epoxy Primer: https://www.smlmarinepaints.co.uk/pri...
- Applied with a Super Smooth Flock Roller: https://www.smlmarinepaints.co.uk/bru...
- Sand with 180g flexible sanding board: https://www.marineindustrial.co.uk/Ca...
- 2 coats SML High Build Epoxy Primer
- Sand with 320g by hand
- Sprayed 3 coats Epifanes Polyurethane Gloss White: https://www.marineindustrial.co.uk/Ca...

I hope you enjoy the video, if you have any questions about the process please feel free to pop them in the comments below and please remember to subscribe if you would like to follow the rest of the project.

#boat #painting #epifanes

You can also follow my work at all the places below.

- Website -
https://danleeboatbuilding.co.uk

- Facebook -
  / danleeboatbuilding  

- Instagram -
  / danleeboatbuilding