LOWERING A BASE C8 CORVETTE | PARAGON LOWERING SPRINGS | LESSONS LEARNED | RIDE QUALITY?

Описание к видео LOWERING A BASE C8 CORVETTE | PARAGON LOWERING SPRINGS | LESSONS LEARNED | RIDE QUALITY?

In this episode we finally start to tackle C8 upgrades starting with the suspension. Enjoy.

Tools needed:
Spring compressor tool
impact (not needed, but very helpful)
low profile jack
Torque wrench
11,13,19,21 & 22MM sockets
T-15 Torx bit
mallet
Lowering springs
Flat edge screw driver
sharp blade or jig saw

Torque specs:
upper 3 bolts 24 ft.lbs
lower control arm bolt 150 ft.lbs
upper control arm bolts 55 ft lbs

Комментарии

Информация по комментариям в разработке

Похожие видео