How to install a Grundfos SCALA2

The new generation of the all-in-one water pressure booster, SCALA2, can be installed in 4 simple steps:
1️⃣ Connect the pipes. The inlet and outlet connections are adjustable by up +/- 5°, making the installation even easier.
2️⃣ Prime the pump: the large priming plug enables you to fill water quickly and easily. You must fill the pump with a minimum of 1.7 liters of water.
3️⃣ Plug the pump into a power outlet and start the pump. The default pressure setting is 3 bar (43 psi).
4️⃣ Adjust the tank precharge pressure according to the setpoint.

All key features are elaborated on our website, please take a look and see how your customers can benefit of SCALA2: http://gfos.ly/6058bSk6w

Want to learn more about installing SCALA2? Take this short training course on the product: http://gfos.ly/6051bSk6d