Скачать или смотреть 9-15-2020 Future Model 38" Slick 540 - 10x5.5MR

A while ago I picked up an APC 10" x 5.5" Multirotor (LP10055MR) prop with the idea of trying it on a 3D plane at some point. Last night as I was looking for a 10x4.7 SF prop to replace the busted CF prop I saw the MR prop hanging there. It's basically a beefier "big paddle" SF prop. The blade root is nice and thick, unlike the flimsy SF props.



Peak current was 57A. Considering the motor is rated for 50A/30 sec and the 40A ESC is rated for 60A/10 sec, I'd say this is about maxing out both of them. Motor was warm, but not overheated. It was also 48°F ambient, so on a 90°F day, things would get a lot hotter.


Either it's just me, or the prop makes the plane even harder to hover. The CF prop I had on there was a bit tricky, but this seems even harder. Torque roll is really strong. I'll have to fly it some more and see if I can get used to it. If nothing else, flying it some more then trying a 10x4.7 SF would be a good comparison.