Скачать или смотреть How To Get Started with TEMPTU Airpod

Here’s a quick how-to on getting started with your Airpod:

Step 1 Remove Tamper Seal from the front of your Airpod.

Step 2 Shake your Airpod well before each use.

Step 3 Now you can go ahead and pull off that top sticker from your Airpod.

Step 4 Firmly wiggle the Chrome Cap off the back of your Airpod.

Step 5 Pull back firmly on the Clear Loop to prime your Airpod before the first use only.

Step 6 Gently open the Plug in the back of the Airpod. No need to pull it off completely, just pop it open. This allows the air to flow through.

Step 7 Slide the Airpod, window side up, on to the TEMPTU Air, until it clicks into place.

Step 8 Hold down on the Power Button for two seconds to turn the TEMPTU Air on and off.

Step 9 Tap lightly on the Power Button to switch speeds between Light Air, Medium Air and Full Air.

Step 10 Press no more than halfway down on the SoftTouch Control with your pointer finger to release the optimal amount of TEMPTU airbrush makeup or root touch-up.

Step 11 Press down on the Release Button located on the side of the TEMPTU Air and pull downward on the Airpod to remove it from the TEMPTU Air.

Step 12 Be sure to close the Plug firmly back up on the Airpod when you are done using it.

Step 13 Replace the Chrome Cap on the Airpod for clean storage.