Can You Get Shocked From a Neutral Conductor?

At some point, most of us electricians have received a shock from touching a hot conductor and something that is grounded. Some of us have also been shocked by touching 2 different hot conductors! But what about a neutral conductor? Is it possible to get shocked by the neutral? In the latest episode of Electrician U, Dustin talks about this phenomenon and clears a few things up.

🤘⚡️EU Learning System⚡️🤘
For Individuals --- https://electricianu.com/learning-sys...
For Businesses --- https://electricianu.com/learning-sys...
-Video courses on every side of the electrical trade (theory, code, safety, wiring, install, troubleshooting, leadership, and more)
-Practice exams for 2017, 2020, 2023 code
-YouTube videos categorized and searchable
-Audio lessons
-Forum
-Business version has admin portal and ability to assign learning to technicians and monitor progress
-Any business size from 2 techs to 2,000!

🎓💡CONTINUING EDUCATION💡🎓
Sign up here --- https://electricianu.com/continuing-e...
-State Approved
-Video Based

✍📝PRACTICE EXAMS📝✍
Get them here --- https://www.electricianu.com/electric...
-2017, 2020, and 2023 NEC versions
-Online Residential Wireman Exam
-Online Journeyman Exam
-Online Master Exam
-300 Question Online Code Cannon (not license specific, all code)
-Take as many times as you want
-All of the above come with printable PDFs

🎤🎧PODCAST🎧🎤
Spotify:
https://open.spotify.com/show/7ldCwdx...
Apple Podcast:
https://podcasts.apple.com/us/podcast...

📱👍SOCIALS👍📱
TikTok -   / electricianu  
Instagram -   / electrician_u  
Facebook -   / theelectricianu  
Reddit -   / electricianu  
Rumble - https://rumble.com/c/ElectricianU
Discord -   / discord  

🎧🎹Music, Editing, and Videography by Drake Descant and Rob LeBlanc🎹🎧

#electrician #electrical #electricity

As we have discussed in previous episode of Electrician U, in order for electricity to work as we intend it to, it must travel in loops. In a 120v circuit, for example, current leaves on the hot conductor, travels THRU the load, and returns on the neutral conductor. In this way, the loop is closed and current can flow. Break either the hot or the neutral, and current will no longer flow and whatever load you have in the circuit will not operate. The same process is true for a multi hot (240v with 2 hots for example) circuit. Current will travel out on one hot, THRU the load, and back on the other hot completing the circuit and allowing the current to flow.
To receive a shock, you must be touching something that is energized AND something else that allows the loop to be completed and current to flow. So, the hot wire and the ground wire or the hot wire and a neutral or the hot wire and another hot wire. Any of those scenarios will allow current to flow and you will receive a nasty shock! So, with neutrals, the same rules apply. You must be touching the neutral conductor AND something else for it to SHOCK you! Imagine if you were touching the side of the lamp screw shell with one hand and something grounded with the other, you will receive a shock (in addition to having the lamp come ON!). But if you were to touch the side of that lamp screw shell and NOTHING ELSE, then the loop will NOT be closed and current CANNOT flow.
You could potentially receive a shock from a neutral conductor if it is not bonded to ground at the service point. But again, to get shocked by the neutral conductor, you would have to be touching it AND something else so current can flow. It is possible to get shocked by touching two neutrals. If you were to touch the neutral coming from the side of a screw shell from a light bulb and the neutral GOING TO the panel, you will most definitely (if the circuit is energized) receive a shock. But this is only because you are completing the loop! At the point of the screw shell, the neutral conductor touching it is essentially the same wire as the hot as things will be travelling thru the filament of the light bulb. So, again, you are just completing the loop and allowing current to flow.
As a good rule of thumb, when working on something that is energized, don’t touch 2 things at once! Some older electricians keep one hand in a pocket, so it forces them to not touch anything with it. Check your boots and make sure they are solid and make sure you are not standing or kneeling in water. Best option is to turn the circuit off, but if necessary to work with something energized (yes there are reasons why we NEED to have it on), take the necessary steps to protect yourself.