Honda Power Steering Pump Re-Seal & Bearing Replacement (90s & 2000s vehicles)

This video is made as a guideline to show you how to replace all the seals as well as the bearing on your Honda power steering pump. This video was filmed on a 2004 Honda Accord, but will apply to most Hondas of the 90s and 2000s.
I hope it was helpful!

Parts used in this video:
Power Steering Pump Gasket Kit (make sure to select your specific year and model when choosing the seal kit): https://www.rockauto.com/en/catalog/h...
Power Steering Shaft Bearing: https://www.amazon.com/Genuine-Honda-...
Honda Genuine Power Steering Fluid (Recommended): It’s cheapest at the parts department of your local Honda dealer, so go get it there! If not, here’s what I used…
Prestone Power Steering Fluid for Asian Vehicles: https://www.amazon.com/Prestone-AS269...

Tools used in this video:
3/8” Deep 6-Point Sockets: https://www.harborfreight.com/10-pc-3...
3/8” Ratchet: https://www.harborfreight.com/38-in-d...
10mm Allen Socket: https://www.amazon.com/DEWALT-Drive-1...
Silicone Paste: https://www.amazon.com/3M-08946-Clear...
3/8” Torque Wrench: https://www.harborfreight.com/38-in-d...
½ Bauer Impact Gun: https://www.harborfreight.com/20v-hyp...
3 Ton Low Profile Jack: https://www.harborfreight.com/3-ton-l...
6 Ton Jack Stands: https://www.harborfreight.com/6-ton-s...
Rubber Mallet: https://www.harborfreight.com/1-12-lb...

Please note that I am not a professional mechanic, nor am I saying that you must do exactly what I say in this video. Perform these repairs at your own risk! Safety first ;)