Machining a High Volume Vapor Blasting Nozzle

DIY vapor blaster plans. http://arnoldsdesign.com/Digital-Plan... Convert a sand blast cabinet into a vapor hone.

Materials I use in the video:
https://amzn.to/2RN4YSA DC Power Supply Variable 0-30 V / 0-10 A
https://amzn.to/2mj4dQU Simple Green Extreme Aircraft and Precision Cleaner, 1 Gallon Bottle 13406
https://amzn.to/2LkUxAm Online Metal Supply 1100-H14 Aluminum Sheet, Thickness: 0.032 inch, Width: 16 inches, Length: 24 inches
https://amzn.to/2VkVX5j Red Anodizing Dye - 4 oz
https://amzn.to/2Jpo3Dk Staples 211 Carnauba Paste Wax, 1-Pound, Clear
https://amzn.to/2NT3mDi Battery Acid, 6 Qt
https://amzn.to/2mlX2HO 28 Pieces 120 to 3000 Grit Wet Dry Sandpaper Assortment 9x3.6Inch Abrasive Paper Sanding
https://amzn.to/2LiyjPj Argee RG502 Plastic Pail, 10-Pack, White
https://amzn.to/2KVs9IV Inkbird Itc-308 Digital Temperature Controller Outlet Thermostat, 2-stage, 1100w, w/Sensor
https://amzn.to/2JsXQE1 TEMCo Titanium Wire 18 Gauge 25 Ft Surgical Grade

Like | Subscribe | Share
Machining a new prototype vapor blasting nozzle. It has 2.25 times the volume, or slurry capacity of my current nozzle. It is for finishing only.
Ten Chapters:
Ch I: Machining the Housing 0:20
Ch II: Machining the Air Jet 3:37
Ch III: Turning the Nozzle 5:32
Ch IV: Turning the Slurry Inlet Fitting: 6:08
Ch V: Crude Heat Treatment of the Nozzle and Air Jet 7:25
Ch VI: Hard Turning the Nozzle and Air Jet 8:20
Ch VII: Even Cruder Tempering 8:43
Ch VIII: Vapor blasting the Vapor Blasting Nozzle 9:11
Ch IX: Testing: Old Nozzle vs. New Nozzle 9:36
Ch X: Makin' It Pretty ~Anodizing and Final Assembly~ 10:17

As an Amazon Associate I earn from qualifying purchases.