1000W Rear Hub Motor Spoke Wheel Building Guide Ebike Books : Non-Cross Flange Sample

If spokes need to be installed inward towards the hub like in this wheel, it is best to first insert all of the spokes and then install the rim. In this video, some of the spokes were inserted later to aid in understanding, which caused them to be slightly bent during installation. Tightening the spoke nipples will usually straighten out the spokes.

Wheel Building SPOKE CALCULATOR Now Online
https://www.prowheelbuilder.com/spoke...

⚡4 E-Bike Books
https://www.amazon.com/gp/product/B0C...

Tires, tubes, spokes, wheels, rims, hubs Lists
https://cafe.naver.com/tgenter/705

Spokes

Hub motor electric bicycle only diameter 12G 2.4mm / slightly thinner 13G

https://s.click.aliexpress.com/e/_A1fYcj Custom made to the required length

https://s.click.aliexpress.com/e/_AF0uwF 12G standard length selectable

https://s.click.aliexpress.com/e/_9RL9mr 12G standard short length optional

https://s.click.aliexpress.com/e/_AkDbZd 13G 26 inches or more and 350w or less motor is used.

E-Bike Recommended Spoke Wrench
Be careful not to overtighten. I'll work on it while comparing it to other bicycle spoke tensions!!
https://s.click.aliexpress.com/e/_994c0J
​
36Holes RIm for E-Bike
https://s.click.aliexpress.com/e/_AdhJQf

For Fat Bike electric bike
https://s.click.aliexpress.com/e/_AYLqTN

MTB/ROAD Central Drive Motor Recommended Hubs/Rims
MTX33mm 39mm Super Wide High Strength Rim 27.5/26 32Hole
Central drive motor recommended / Hub motor not available
https://s.click.aliexpress.com/e/_9jL4Y7

Dr.Road The most trusted spoke brand

DT Revolution 2.0-1.5-2.0 Road XC Extremely light and strong double butted spokes
https://s.click.aliexpress.com/e/_9viUr1

DT Competition Competition All-Mountain Recommended Double Butted Spokes 2.0-1.8-2.0
https://s.click.aliexpress.com/e/_ATKuo3

The strongest among the DT champion brand makers. Central drive motor wheel building recommendation
https://s.click.aliexpress.com/e/_99vnWR

Black brass nipples. It's a bit heavy, but won't corrode or break over time.
https://s.click.aliexpress.com/e/_A0R48X

This is a 14G cost performance spoke.
https://s.click.aliexpress.com/e/_97dlgx

14G aero special spokes
https://s.click.aliexpress.com/e/_ALj...

Hub motor electric bicycle only diameter 12G 2.4mm / slightly thinner 13G

https://s.click.aliexpress.com/e/_A1fYcj Custom made to the required length

https://s.click.aliexpress.com/e/_AF0uwF 12G standard length selectable

https://s.click.aliexpress.com/e/_9RL9mr 12G standard short length optional

https://s.click.aliexpress.com/e/_AkDbZd 13G 26 inches or more and 350w or less motor is used.

E-Bike Recommended Spoke Wrench
Be careful not to overtighten. I'll work on it while comparing it to other bicycle spoke tensions!!
https://s.click.aliexpress.com/e/_994c0J

36Holes RIm for E-Bike
https://s.click.aliexpress.com/e/_AdhJQf

For Fat Bike electric bike
https://s.click.aliexpress.com/e/_AYLqTN

MTB/ROAD Central Drive Motor Recommended Hubs/Rims
MTX33mm 39mm Super Wide High Strength Rim 27.5/26 32Hole
Central drive motor recommended / Hub motor not available

Dr.Road The most trusted spoke brand

DT Revolution 2.0-1.5-2.0 Road XC Extremely light and strong double butted spokes
https://s.click.aliexpress.com/e/_9viUr1

DT Competition Competition All-Mountain Recommended Double Butted Spokes 2.0-1.8-2.0
https://s.click.aliexpress.com/e/_ATKuo3

The strongest among the DT champion brand makers. Central drive motor wheel building recommendation
https://s.click.aliexpress.com/e/_99vnWR

Black brass nipples. It's a bit heavy, but won't corrode or break over time.

https://s.click.aliexpress.com/e/_A0R48X

This is a 14G cost performance spoke.
https://s.click.aliexpress.com/e/_97dlgx

14G aero special spokes
https://s.click.aliexpress.com/e/_ALjtWB

0:00 Spokes Length Calculation
2:24 ERD
2:53 Spoke installation
12:06 Spokes Cross and Overlap
13:39 Wheel alignment.
15:23 Left and Right alignment
16:48 Up and Down alignment
19:54 Wheel Centering

Flange SIDE A Out to In
Flange SIDE B Out to In
Flange SIDE A Out to In
Flange SIDE B Out to In