HOW TO: 4-nozzle installation on DJI Agras T50

The DJI Agriculture Agras T50 allows operators to install a 4-nozzle system. This enables the Agras T50 to achieve a higher flow rate of up to 6.34 gallons per minute, compared to 4.23 gallons per minute when using the standard configuration.

This tutorial is designed to guide you through the process of installing the 4-nozzle kit on your DJI Agras T50. The exact same process applies to the DJI Agras T25.

𝗛𝗮𝘃𝗲 𝗤𝘂𝗲𝘀𝘁𝗶𝗼𝗻𝘀? Ask in the comments.
=================================
👉 Subscribe for more DJI Agras T50 content
👉 Ring the bell for alerts

https://www.bestwaydrones.com
https://www.bestwayswag.com

Facebook:
  / bestwayaghq  
BestwayAgHQ

Instagram:
https://www.bestwayag.com/bestway_ag
@bestway_ag

Songs licensed through Adobe Stock.

#djiagras #djiagriculture #djit50 #agrast50 #bestwayag
‪@DJIAgriculture‬

TIMESTAMPS
00:00 - Introduction
04:07 - Step 1: Preparing to install the Agras T50 4 nozzle kit
05:31 - Step 2: Removing the ESC
07:38 - Step 3: Removing the ESC cable
10:46 - Step 4: Installing the NEW ESC cable
17:58 - Step 5: Installing the flex feed tube
19:39 - Step 6: Installing the new spray head
24:23 - Step 7: Installing the in-position sensor
28:21 - Step 8: Final connections