OP COM usb v2 driver Windows 10 / How to op com windows driver /op com windows 10/7/xp

Windows 10 OPCOM Installation Instructions
download files from here
http://www.op-com.hu/downloads_en.aspx

Instruction down below
Download WinRAR and install if needed
Extract file to the desired destination e.g C:\OPCOM
Plug in the opcom unit
Open Device Manager (Press the Windows key + X or right-click on Start to open the Power User Menu.)
Find opcom USB V2 then right-click and select update driver
Locate the extracted OPCOM folder from earlier and highlight the folder drivers 32 & 64bit then click next
It should now install the drivers it may find a serial driver with no drivers this is normal.
From within the extracted folder, Right Click on OPCOM and select properties. Select the Compatibility tab then:
Check the Run this program in compatibility mode for box then select Windows XP (Service Pack 2) from the drop-down
Check the Run this program as an administrator box
Run OPCOM from the extracted folder and allow it to run as an administrator
Click settings then click “Test Interface” Button it should come up with test ended successfully.
You are now up and running.