How to Replace Inner Tie Rod 2010-2016 Cadillac SRX

Buy Now!
New Tie Rod Set from 1AAuto.com http://1aau.to/ia/1ASFK06580
New Tie Rod from 1AAuto.com http://1aau.to/ia/1ASTE01013

The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms. This video shows you how to replace the inner tie rods on your 2010-2016 Cadillac SRX.

This repair was done on a 2013 Cadillac SRX Premium 3.6L Sport Utility 4-Door Automatic and the process should be similar on the following vehicles:
2010 Cadillac SRX
2011 Cadillac SRX
2012 Cadillac SRX
2013 Cadillac SRX
2014 Cadillac SRX
2015 Cadillac SRX
2016 Cadillac SRX

Tools you will need:
• 18mm Socket
• 21mm Socket
• 22mm Deep Socket
• Pickle Fork
• 1/2 Inch Impact Gun http://1aau.to/oeL/1AXAA00252
• 3/8 Inch Impact Gun
• Gloves http://1aau.to/ohn/1AXSS00048
• Safety Glasses

Subscribe:    / @trq  

Check out our playlist:
Cadillac SRX 2010-2016 2nd Generation:    • Cadillac SRX 2010-2016 2nd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.