Скачать или смотреть BOOT LAMP INSTALLATION |Tata Tiago boot light install

To install a boot light in your Tata Tiago, you'll need a few essential items:
Required Materials:
OEM Tata Tiago Boot Lamp (available for ₹96 at Maruti or ₹144 from Tata's website)
2.5 meters of wire (costing around ₹20)
Long flat-head screwdriver
Short cross-head screwdriver
Electrical insulation tape
Super glue/glue gun
Soldering iron, flux, and wire

Step-by-Step Installation Process:

1. *Remove the cabin lamp*: Use a flat-head screwdriver to unscrew the two + type screws and pull the lamp's harness outwards.
2. *Snake the wire*: Take the wire towards the right-side B-pillar, then towards the rear C-pillar. Unfasten the panel fascia on the C-pillar using a long flat-head screwdriver.
3. *Make connections*: Connect the black wire to the neutral and the green wire to the positive terminal on the cabin lamp. Solder the wires to the lamp and glue them together for security.
4. *Fit the lamp*: Place the lamp into the slot on the right-hand side of the boot.

Important Considerations:

Ensure correct polarity when connecting the wires to avoid any damage.
Use electrical insulation tape to secure the wires and prevent short circuits.
You may not need to disconnect the battery during installation, but it's recommended to take necessary precautions.

Additional Resources:

Refer to the Tata Tiago owner's manual for more information on electrical systems and safety precautions.
You can find the OEM boot lamp at authorized Tata dealerships or online marketplaces ¹ ².
#shortsfeed #modificition #ytshorts #modified #carlover #automobile #viral #youtube #music #youtubeshorts