Haslab Hasbro Pack Keep Alive board installation Spengler KeepAlive

Just a quick video showing the installation of my prototype board that will keep the Hasbro Pack alive.
This board will remove the 3 minute idle on time timer and the 5 minute off time timer so the pack can be left running for as long as the batteries will allow.

A couple of other features:
1) switching power supply so you can use a large capacity rechargeable 12V battery to power the pack (and the Spengler Wand)
2) Will ignore the wand and continue running until you attach and powerup the wand, then the wand takes over.
3) The wand will be able to power up the pack even if the pack has been off for more than 5 minutes.
4) Stretch goal #1: Add support for the vent relay to be controlled from the Spengler Wand if it has the Wand KeepAlive board installed. You can add your own e-cig smoke kit to the pack!
5) Stretch goal #2: Allow a sound board to turn the pack on and off. If you want to use the Spengler Link and Spengler sound board and replace the loom or at least the two wires in the Haslab loom, this will allow the sound board/wand to turn the pack on and off.

Will eventually be available for purchase from eBay and through a GBFans For Sale Thread, though the Spengler Wand KeepAlive board may be all you need (the upcoming new version will also keep the pack alive)!

https://www.gbfans.com/forum/viewtopi...
Will eventually show up in my eBay store: https://www.ebay.com/str/ghostlab42