M4A3E8 Sherman "Easy Eight" from the movie FURY

The previously designed Foldable M4 sherman tank was very popular, and requests from customers to make various tanks flooded the request page.
https://fab365.net/requests

This time, I designed the M4A3E8 Sherman Tank, which was especially popular with the public through the movie "Fury".

STL- https://fab365.net/items/331

It's very simple to make, and the only difference from the previously designed M4 sherman is that you have to put the tires and wheel caps on it. If the tire does not fit well, cut off the protrusions on the wheel axle a little to fit the tire well. Please be careful as the wheel may come off if you cut the protrusions of the wheel shaft too much.

※ Precautions! ※
1. The rear tires and wheels(track idlers) are slightly larger in size. This can be confusing, so check the size carefully!
2. Track is a pair of long and short ones.
3. The front wheel (track drive sprocket) must be pushed in as far as the other wheels are fitted.

Tracks are sometimes separated. In this case, just increase the Material Flow slightly in the slicer and print again.
In addition, many of the customer's know-how and experiences are written in the reviews of tanks previously designed by Fab365. It will be more helpful if you refer to them.

Please see the video for details.

1 : 48 scale
Largest part in printing, size = X 128mm, Y 154mm, Z 84mm, After full assembly size= X 64mm, Y 152mm, Z 63mm

Total Weight = 116.7g

• Build bed : https://s.click.aliexpress.com/e/_DdQ...