Panasonic FZ1000 Video Settings for Film Look - PART 1

……….……….……….……….
Panasonic FZ1000 Video Settings for Film Look - PART 4

Lens-Sensor SOOC SETTINGS:
https://www.silverlightphotoco.com/ca...

SHARPENING Settings (Davinci Resolve):
Lens@Full "WIDE" = .47 (Sharpening)
Lens@Mid "TIGHT" = .46 (Sharpening)
Lens@Full "TELE" = .43 (Sharpening)
……….……….……….……….
The KIT:

1. The CAMERA = Panasonic FZ1000 https://amzn.to/3teXmee
2. The LENS = (Built-In)
3: The FILTER = (None)
……….……….……….……….
NOTES:
This current test is for when you're NOT using a filter. The settings I had posted before were for using a B+W F-PRO UV filter, and I really prefer the tests with that filter (settings still available by searching on my website) but then it occurred to me today, that some people may not be able to easily get that filter. So far, this test is coming out worse, because using the filter was improving the micro contrast (it smoothed the highlight rolloff and did other good things). These settings are pretty good, but if you can get a B+W F-PRO UV filter, I think this camera works better with one. I should also note that I've found ISO 200 to create the most real-looking image (maybe it's the "native ISO"?) So, if you can use ISO 200, I do recommend it (even over 125 and 160, even though they're lower, etc.) Also, the image degrades noticeably above ISO 400, though I sometimes go up to ISO 800 when needed, but be aware that it's going to look like it has more "film grain" (which isn't always bad, but it won't match your other footage, if the other footage was shot at a lower ISO).

#FZ1000 #LumixFZ1000 #panasonicfz1000