Скачать или смотреть Making a boring bar on the CNC mill || RotarySMP

I need a boring bar for a Narex VHU planing and boring head, which is like a Wohlhaupter. Since the Schaublin 125CNC lathe tool changer also takes 25mm shank tooling, it will work there as well.
____________________
Onshape is the CAD system I use – Try Onshape Pro free for up to 6 months
https://onshape.pro/RotarySMP
____________________
If you enjoy my content and would like to support my channel... I'd really appreciate it.
Please join me on Patreon and help build this community.
  / rotarysmp  
or sign up for youtube memberships using the "JOIN" button above.
or please just buy me a coffee...
https://tinyurl.com/5cv2yscb
____________________
These are affiliate links, so if you purchase through then, a small percentage of the profits will contribute to the channel. It costs no extra for you. Thanks.
DCMT carbide inserts:
USA link - https://amzn.to/4o87OOM
EU link - https://amzn.to/3WlZHSC
____________________
00:00 - Intro
00:40 - What I need to make
00:59 - Nikken collet adapter accuracy
05:34 - Setting up the Maho MH400E CNC mill
06:53 - Touching up the D-bit on the Clarkson T&C grinder
11:03 - Op 1 - Halving the blank - 16mm carbide end mill
12:00 - Op 2 - spot drilling
12:15 - Op 3 - drilling
12:28 - Op 4 - rough milling insert pocket
13:02 - Op 5 - Finish pocket. CRASH!!!
14:16 - What can I do about collet adapter run out?
19:13 - Machining the short boring bar- Op 1 - milling
19:44 - Op 2 - Spot drill
20:04 - Op 3 -drilling
20:19 - Op 4 - roughing the insert pocket
20:43 - Op 5 - D-Bit finishing the pocket
21:17 - Op 7 - hand tapping
22:26 - Op 7 - Milling the back clearance
26:29 - Op 8 - Adjusting the pocket
28:00 - Op 9 - Milling a flat for the screws to bear on
28:41 - Op 10 - Anti rotation pin
______________
Music
Falconer - Easy Beach
Ben Hendler - Highway
Roger Rivas - Heading West