Fix the Hornady AP Shell Plate Wobble

If you load pistol rounds on the Hornady AP and have the brass scattering powder all over your shell plate or shaking unseated bullets loose - this simple fix is for you.
All that you need to do is remove the problem shell plate, turn it over and adjust the height of the two seated bearings on which it rides and indexes.
You do this with a 5/32" punch and a hammer. Place the punch on the bearing and you will feel it retract a bit and then gently tap it down to reduce the seating depth - very, very little. You want it so the bearing is visibly above the ring but just enough for rolling and indexing.
If you happen to go too far just turn the shell plate over and tap it back down from the top.
Remember to use care and good common sense.