OIL PRESSURE SENDER 2001-2007 DODGE CARAVAN GRAND CARAVAN TOWN AND COUNTRY

Replacement of the oil pressure sender (AKA oil pressure switch) that turns on the check oil light in your dash. After the factory unit failed, I replaced the sensor 3 times, and each one leaked oil. This was likely due to the fact that I used a normal socket to install it. In this video I used a socket specifically made for installing the oil pressure switch. I am happy to say it has been about a year now and the sensor is functioning perfectly with no leaks.
FYI: I sprayed out the plug with electronics cleaner/degreaser available at hardware stores, auto parts stores, Walmart etc.
Also it is not necessary to change your oil to do this repair, but you may find it easier to have the oil filter out of your way. When you remove the sensor, expect a certain amount of oil to drain out of the hole.

Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. DIY Benz garage is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. DIY Benz garage strongly recommends being careful and adhering to the safety rules when doing any repair or replacement.