Disassembly Asus ROG Strix G15 and replacing thermal paste

The laptop was unsuccessfully serviced with ordinary thermal paste and left traces of liquid metal, naturally after that it overheated greatly. We disassembled, cleaned and changed the thermal paste to Thermal Grizzly Kryonaut Extreme with 14.2 W/mk and tested it - https://amzn.to/429JVwd

Specs:
Asus ROG Strix G15 Advantage Edition - https://amzn.to/427oz2C
CPU AMD Ryzen™ 9 5900HX
RAM 16GB DDR4
SSD 512GB
GPU AMD® Radeon™ RX 6800M 12GB GDDR6
Display 15,6" 165Hz 3ms WQHD (2560 x 1440) 16:9 IPS

The tools I use - https://amzn.to/3v9kf6Z
The thermal paste that I use - https://amzn.to/3TvU8Ar

Every subscriber is important to us, please subscribe if you want to see more contant like this. Thanks:)

0:14 Remove the back cover
1:03 Remove the armored case
1:12 Disconnect the battery and unscrew the bottom light
1:36 Disconnect the display cable
1:40 Unscrew and remove the evaporation chamber with fans
2:00 The plant has liquid metal on the CPU and GPU, which was replaced with cheap thermal paste that did not hold the temperature normally, we will replace it with Thermal Grizzly Kryonaut Extreme
2:16 Remove the remaining thermal paste and liquid metal with isopropyl alcohol
2:43 Remove bracelets with liquid metal residues; in any case, they cannot be reused
3:04 Add liquid thermal pads a little
3:25 Apply Thermal Grizzly Kryonaut Extreme, probably the bedst thermal paste for extreme overclocking
4:03 Connect the fans and install the evaporation chamber
4:40 Let's tighten everything up
5:05 Connect the display cable
5:19 Installing the battery
5:36 Connect the bottom light and battery
6:12 Screw the back cover

Testing:
Cyberpunk 2077
Witcher 3
Benchmark Superposition