Скачать или смотреть Inertial drive continuation.

Again, the same propulsion kind. A little different animation. This solution is predicted to simulate negative gravity based on harnessing inertial forces. The negative gravity would not be generated in form of field as we can imagine right now because it is a product of rotation of heavy weights on which the centrifugal force is acting. The negative gravity will be appearing like inertial mechanic force acting in the center of device on central axis in form of pressure on centrally located collar. The force coming from centrifugal force by use of rotation acting on the spring is in this case not compensated. Centrifugal force will be trying to displace the bottom collar toward the top of the device by use of mechanic forces coming from rotation of the weights, collar is the point where the chains are attached at the bottom (chains are those arms on which are main masses attached in green color). This collar has an ability to move on central axis because it has eight ball bearings placed in proper holes in sliding part underneath this collar. The full system has only one axis of rotation in each generator. During the spring is compressed in upper direction it is encountering on its way the obstacle in form of second collar made on the same central axis. The axis is rounded partially but not completely allowing the bearings in sliding system to stay on their positions. When the central spring is making push on the obstacle it will be pushing on this obstacle by use of its upper edge, and the more it is compressed the more force will be generated in form of pressure on the obstacle. The second upper part of the rotor on which the weights are attached from the top side of the device has not an ability to move, so in assumption the result force will be trying to push the bottom collar by pull of the rotating masses toward the outside of the device by centrifugal force. This as I had said will provide the lift of bottom collar what with application of the spring should in assumption generate the lift of entire system, this is the only move the system will make besides main rotation and compression of the spring. System is consisting of three such a rotor, each have one AC electric motor with electronic speed control. I will try this solution, so I could say clearly if it is working or not. This is not safe device in operation because the rotors should rotate with at least 3000 rpm.