How to Replace Catalytic Converter and Pipe Assembly 2010-2014 Subaru Outback 2.5L H4

Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/93/bq/direct-fit-cat...

This video shows you how to install a new catalytic converter & pipe assembly from TRQ on your 2010-2014 Subaru Outback 2.5L H4.

This repair was done on a 2012 Subaru Outback 2.5i 2.5L Wagon 4-Door AWD Automatic and the process should be similar on the following vehicles:
2010 Subaru Outback
2011 Subaru Outback
2012 Subaru Outback
2013 Subaru Outback
2014 Subaru Outback

Tools you will need:
• Pry Bar http://1aau.to/o8s/1AXAA00020
• 14mm Wrench http://1aau.to/oacg/1AXAA00010
• 22mm Wrench
• 14mm Socket http://1aau.to/ob5L/1AXAA00015
• O2 Sensor Socket
• Push Pin Pliers
• Ratchet http://1aau.to/ob7v/1AXAA00016
• Gloves http://1aau.to/oa2U/1AXSS00048
• Safety Glasses
• Sandpaper
• Surface Prep Discs
• Floor Jack http://1aau.to/oawi/1AXAA00068
• Jack Stands http://1aau.to/oaij/1AXAA00065
• Pick http://1aau.to/o29/1AXAA00037
• Razor Blade / Gasket Scraper
• Sanding Block
• Vise
• Wheel Chocks
• Wire Brush http://1aau.to/oxU/1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Subaru Outback 3rd Generation 2010-2014:    • Subaru Outback 3rd Generation 2010-2014  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.