Clearing paper jam errors – HLL5200DW or HLL6200DW

Learn how to clear the “Jam Tray,” “Jam Inside,” “Jam 2-sided,” ”Jam Rear,” or “No Paper Fed” errors on your Brother HL-L5000D, HL-L5100DN, HL-L5200DW, HL-L5200DWT, HL-L6200DW, HL-L6200DWT, or HL-L6250DW laser printer.

The model shown is the HL-L6200DW

Models covered:
Brother HLL5100DN
Brother HLL5200DW
Brother HLL5200DWT
Brother HLL6200DW
Brother HLL6200DWT
Brother HLL6250DW


Errors covered:
Jam Tray
Jam Inside
Jam 2-sided
Jam Rear
No Paper Fed

For more videos, tutorials, and FAQs visit our support site at: http://www.brother-usa.com/support

Quick Links / Table of Contents:
Models and errors Covered 00:09
Remove paper tray 00:36
Remove drum and toner 00:45
Inspect drum 01:08:00
Remove 2-sided tray 01:38
Open fuser cover 1:47
Close fuser and back covers 02:02
Reinstall 2-sided tray 02:11
Reinstall drum and toner 02:17
Inspect paper and paper tray 02:22
Reinstall paper tray 02:52


Transcript:
Welcome. Today we’re going to learn how to clear paper jam errors in your Brother HL-L6200DW

This video will cover multiple models. Even though your machine may not match the model on the screen, the overall process will be the same.

This video will also cover several types of paper jam errors and allow you clear the resulting error messages.

Before working on your Brother machine, please allow it to run for 10 minutes to allow the fan to cool the internal parts. Handling internal parts while still hot may result in injury.

We will begin by pulling the paper tray completely out of the machine. If there is jammed paper in the tray opening, remove it using both hands.

Next, press the front cover release button and open the front cover. Remove the drum and toner assembly and place it on a clean flat surface. Jammed paper may be pulled out with the assembly or be released for easy removal.

Any paper still jammed inside the machine near the back of the opening should be removed through the back panel and will be addressed later in the video.

Then remove the toner cartridge from the drum unit by pressing the green lock lever. Carefully examine the drum for obstructions such labels, tape, or ripped paper. Remove any obstructions found. Be careful not to touch the drum roller during this process as this can cause print quality problems. Then reinstall the toner cartridge into the drum unit. Listen for the cartridge to lock into place.

Leaving the front cover open, turn to the back of the machine and remove the 2-sided tray. Check for any paper jammed under the machine and remove.

Next, open the back cover. Open the fuser cover by grabbing the green levers on the left and right side and pulling them towards you. Remove any jammed paper in the fuser unit by gently pulling with both hands.

Close the fuser cover. Now close the back cover.

Replace the 2-sided tray, ensuring it is placed firmly inside the machine.

Next reinstall the drum and toner assembly into the machine and close the front cover.

Remove the paper from the paper tray and verify that the tray guides are set to the correct paper size.

Next fan the paper…and reload it into the paper tray. Ensure the tray guides are not pushed too tightly against the paper which can cause jamming. Also verify that the paper is not loaded above the maximum fill line.

Finally replace the paper tray firmly inside the machine.

For more Tutorials, FAQ's and Videos, visit us at www.brother-usa.com


Thank you for choosing Brother

Customers also searched:
Brother HL L5000D paper jam
Brother HL L5100DN paper jam
Brother HL L5200DW paper jam
Brother HL L5200DWT paper jam
Brother HL L6200DW paper jam
Brother HL L6200DWT paper jam
Brother HL L6250DW paper jam

An official Brother printer support resource