Скачать или смотреть How to run Printer Stepper Motor using L298N & Arduino.

Welcome to our channel! In today's Video, we'll be showing you how to run a printer stepper motor using the L298N driver IC and an Arduino. Whether you're a beginner or an experienced hobbyist, this step-by-step guide will help you understand the entire process, from wiring to coding.

Components Needed :-
1. Arduino Uno
2. L298N Motor Driver IC
3. Stepper Motor (usually a bipolar stepper from a printer)
4. Some jumper wires
5. Power supply (suitable for your stepper motor, often 12V)

Connections
1. Power Supply Connections:
Connect the 12V power supply to the 12V pin on the L298N module.
Connect the ground of the power supply to the GND pin on the L298N module.

2. L298N to Stepper Motor:
Connect the OUT1 and OUT2 pins of the L298N to the first coil of the stepper motor.
Connect the OUT3 and OUT4 pins of the L298N to the second coil of the stepper motor.

3. L298N to Arduino Uno:
Connect the IN1 pin on the L298N to pin 5 on the Arduino.
Connect the IN2 pin on the L298N to pin 4 on the Arduino.
Connect the IN3 pin on the L298N to pin 3 on the Arduino.
Connect the IN4 pin on the L298N to pin 2 on the Arduino.

4. Ground Connections:
Connect the GND pin on the Arduino to the GND pin on the L298N module.
Steps to Run the Stepper Motor
Prepare the Arduino IDE:

Download and install the Arduino IDE from arduino.cc.
Install the Stepper Library:

Upload the Code to the Arduino:

Connect your Arduino Uno to your computer using a USB cable.
Select the correct board and port from the Tools menu.
Click on the Upload button to upload the code to the Arduino.
Power Up the Circuit:

Ensure all connections are secure.
Power up the L298N module with the 12V power supply.
Run the Motor:

The stepper motor should now start rotating as per the code uploaded.
You can adjust the speed and number of steps in the code to meet your requirements.

▶️ More video Here!

How to replace Sony PSP battery :
   • How to Replace Sony PSP Portable Gaming Ba...  

How to make mini Electric Screwdriver at home:    • How to make mini Electric Screwdriver at h...  

How to make 433 MHz radio controlled car at home:    • How to make 433 MHz Radio Controlled Car a...  

How to make 433 MHz radio Transmitter and receiver:    • How to make 433 MHz Radio Transmitter and ...  

Complete How make a Home Made Drone:    • Complete How make a Home Made Drone  

Mini CNC plotter:    • Mini CNC plotter  

How to make a 4×4 RC CRAWLER Complete.:    • How to make a 4×4 RC CRAWLER Complete.  

FLYSKY FS-i6:    • FLYSKY FS-i6  

Mini CNC plotter:    • Mini CNC plotter  

Hydraulic Machine's:    • Hydraulic Machine's  

Projects on 555 timer IC:    • Projects on 555 timer IC  

IOT Project (Internet of Things):    • IOT Project (Internet of Things)  

How to make Brushed Motor ESC :    • DIY - How to make a "ESC" for Brushed Moto...  

How make motor drive using L293D driver :    • DIY :- Make a L293D Motor Driver Circuit a...  

Follow ME on INSTAGRAM @techadonmaster.in
  / techadon_master.in