1979-2004 Mustang BMR Adjustable Lower Control Arms - Review & Install

Mustang BMR Adjustable Lower Control Arms.
Reduce wheel hop to improve times at the track with BMR's 1979-2004 Mustang rear lower control arms! The factory lower control arms are prone to flexing under load, which causes wheel hop and bushing deflection. BMR designed their lower control arms to not only reduce wheel hop, but also allow you to adjust the arm to your preferred position. This means you can dial in your pinion angle and your preferred articulation point!

BMR Quality.
Their adjustable control arm kits are constructed with heavy duty MIG welded, 1-5/8" DOM steel tubing to greatly reduce control arm flex. BMR utilizes a chrome moly steel, CNC machined, center adjuster that provides the best strength and durability for long lasting performance. Spherical bushings take the place of your original rubber bushings on the body side to reduce bushing deflection under heavy loads. On the axle side, the rubber bushings are replaced by very strong 95 durometer poly-bushings. BMR tops off their Made in The USA upper control arms with a gloss red or hammertone powder coat finish for durability that lasts!

Fitment Note:
Will NOT fit 1999-2004 Cobra.

Application: 1979-2004 Mustang

BMR Control Arms: https://lmr.com/products/Mustang-BMR-...
________________________________________________________

YouTube: https://www.youtube.com/user/latemode...
Facebook:   / latemodelresto  
Instagram:   / latemodelresto  
Twitter:   / latemodel_resto  

Late Model Restoration LMR SVE 5.0Resto ______________________________________________________
Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-vide...