Scout Hemisphere Performance Fuel Gauge Assembly Instructions

Here are the steps needed to install our fuel gauge for the Indian Scout Bobber.

Installing the Hemisphere Performance Indian Scout Bobber Fuel Gauge kit is very easy with only a few main steps:

1. Drain and remove the tank
2. Remove the fuel pump
3. Drill one hole in the fuel pump flange, and install the fuel line bung. Or, use our optional ready-to-install fuel pump assembly
4. Splice 2 power wires from our kit into a keyed power source like the license plate light
5. Tuck our sensor assembly behind the ignition cover plate
6. Route your cables and small controller box to the front of the bike, replace the tank
7. Slip on the fuel gauge bezel, connect the controller connector
8. Fill the tank with as much gas as you want in there when the gauge reads "empty".
9. Plug in the calibrator module. Turn on ignition to "accessory" position. Press "E" calibrate button. Add gas to fill the tank. Press the "F" calibrate button. Disconnect the calibrator module.
10. Done.

www.hemisphereperformance.com
  / hemisphereperformance  
  / hemisphereperformance  
Join our Customer Design Feedback Group for early access to new products, and to help us with our new product R&D by sharing your opinions:   / 963399101213383