Raspberry Pi Zero inside an SNES Controller - The SNS-005Z

I received a raspberry pi zero recently and thought it would be a fun project to fit it into an official SNES controller

I was inspired by these similar projects:
- http://jamespoole.me/2016/02/29/pi-ze...
-   / 677212612170555393  

The main changes I was looking to try being:
- Use an original SNES controller
- Have HDMI out and power switch coming out the top
- Run it on an internal battery (with charging port on the bottom)

I am really happy with how it came out
It runs for about 2 hours give or take, hooks up to any TV with just an HDMI cable and it was a great way to learn/practice soldering and electronics

Wiring Diagram:
- https://www.dropbox.com/s/ejuknjfanwv...

Case Modifications:
https://www.dropbox.com/s/b372gvkajdp...

Parts:
- Raspberry PI Zero (v1.3) - https://www.raspberrypi.org/products/...
- Super Nintendo Controller (model #SNS-005)
- Powerboost 500c - https://www.adafruit.com/products/1944
- Lithium Ion Polymer Battery (3.7v 500mAh) - https://www.adafruit.com/products/1578
- Slide Switch - https://www.adafruit.com/products/805
- Mini HDMI Male to HDMI female adapter - https://www.amazon.com/gp/product/B00...

How to setup up the gamecon driver to work with RetroPie:
- Blugoo's step by step - http://blug00.blogspot.com/2016/03/ho...
--- The only difference to watch for is that we are wiring up an SNES controller instead of an N64
--- So based on my wiring diagram above the modprobe command to use is "options gamecon_gpio_rpi map=0,0,0,0,0,1"
- Also helpful is the readme file from the gpio driver here - http://blug00.blogspot.fr/2016/03/ret...

If you have questions please don't hesitate to ask in the comments below. I'll do my best to help out.

Thank you!

Update 12/28/16:
@GroveMerida did a great write up on how he built his over at http://thomasannet.wixsite.com/portfo.... Lots of great photos and details there - Check it out!