How to Replace Combination Switch 2003-2011 Mercury Grand Marquis

Buy Now!
New Combination Switch from 1AAuto.com http://1aau.to/ib/1AZTS00095

This video shows you how to install a new combination switch on your 2003-2011 Mercury Grand Marquis. A combination switch typically controls turn signals, windshield wipers, headlights, and more. If one of those systems are not working correctly on your vehicle, you might need to replace the combination switch.

This process should be similar on the following vehicles:
2003 Mercury Grand Marquis
2004 Mercury Grand Marquis
2005 Mercury Grand Marquis
2006 Mercury Grand Marquis
2007 Mercury Grand Marquis
2008 Mercury Grand Marquis
2009 Mercury Grand Marquis
2010 Mercury Grand Marquis
2011 Mercury Grand Marquis

Tools you will need:
• Pocket Screwdriver
• 5.5mm Socket
• T20 Driver http://1aau.to/oAV/1AXAA00008
• 1/2 Inch Ratchet http://1aau.to/o3A/1AXAA00043
• 1/4 Inch Ratchet http://1aau.to/oaNj/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/oa5G/1AXAA00015
• Gloves http://1aau.to/oBa/1AXSS00048
• Safety Glasses http://1aau.to/ouW/1AXAA00343
• 5.5mm Hex Wrench

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.