LiPo Discharger - Resistor Load Bank - Build One Quick and Easy

2 resistors, 1 heat sink, 1 fan, 1 dc step down converter and you've got yourself a passive LiPo discharger that can draw 5a from a 6s pack. If the fan you use can handle the peak voltage you plan on using, you don't need the step down converter.

WARNING: There is NO Automatic shutoff on this device. You'll need to use a low voltage alarm or some other means to ensure you disconnect the battery from the discharger at the appropriate voltage.

Want more? Download the RCVR Resistor Calculator here:
https://rcvideoreviews.com/rcvr-rcalc... and you can plug in your own resistor configuration to get the amp draw you want. Just remember to pay attention to those watts. The higher the watts, the more heat you have to dissipate.

Heat Sink:
https://www.amazon.com/gp/product/B07...

100w 2.5ohm Resistors:
https://www.amazon.com/gp/product/B07...

60mm Fan:
https://www.amazon.com/Maker-Girl-USA...