Скачать или смотреть How To Replace Brushless Motor Bearings, The Cheap Way!

Correction: When putting the set screw back into the motor judt tighten it until you feel pressure. If you tighten it down too much, the motor will have some resistance when turning it and it won't be able to perform as well.

This is a great way to maintain the motors on your quads without having to spend $26 bucks on a new motor. My problem with one of my motors was not solved by this, but it did spin noticeably smoother. I do not take credit for these methods, EngineerX and Project Blue Falcon were the first ones I saw doing these methods. Anyways, enjoy!

Motor Used: https://www.getfpv.com/brotherhobby-d...
Bearings: http://pirofliprc.com/EZO-8x4x3-Beari...
Hex Driver: https://www.amazon.com/Bondhus-10650-...

Check out my Instagram:   / quadbrofpv  

Music: Me talking, eww

~GEAR~
Armattan Chameleon
BrotherHobby Returner R5 Deadpool 2306 2450kv
Spedix ES30A HV (DShot600)
HQProp 5x4.3x3
Matek HubOSD
Raceflight Revolt V2 (Betaflight 3.2.1)
1x Panasonic FM 1000uF 35V Cap
FrSky X4R S-Bus
Runcam Swift (2.1mm lens, ~35 Degrees)
TBS Unify Pro V2 800mW
Foxeer Antenna
SJCAM M10+ (1080p 60fps, GoPro 3 lens, ISO 400)

FrSky Taranis Q X7
Fatshark Attitude V4 (Lumenier Pagoda 2)
Samsung Galaxy S7








Hey, if you see this, you should probably subscribe.