The OCS 500 friction-based overhead conveyor [EN]

The OCS 500 is an overhead conveyor system managing loads up to 500kg/m with a drive speed that can be varied from 1 to 30m/min. The system is capable of transporting up to a 25° angle increase depending on load weight. The drive mechanism consists of a rotating tube driven by a worm gearmotor.
-------------
Payload 500 kg / meter track
Speed ​​1-30 meters / minute
Available as powered, manual and combined systems
Our patented systems are driven by friction.
It creates silent and clean systems.

The drive mechanism in the OCS 500 consists of a rotating tube.

Each trolley is equipped with four angled wheels and four load wheels.

Through the wheels, the rotation is transmitted and converted into friction drive.-

The drive rotation tube is driven by an electric motor.

A motor can drive up to 30 meters. If required, an extension can be connected.

The drive technology is quiet and requires no lubrication.

The motor can be set for different drive speeds, between 1 and 30 meters per minute.

The drive units may have a soft start and stop movement and we always use energy-efficient motors.

Each carriage has RFID chips or bar codes for identification and traceability.

Built-in sensors read the data and creates control over flows and buffer quantity in the production.

The modular system can be built with driven curves from 5 ° to 180 °.

Switches are built into the system in order to direct the trolley on or off the track

The switches are available in both 45 ° and 90 °, for both right and left direction

The system can handle up to 25 ° incline, depending on the payload.

For vertical movement we use our compact vertical conveyor.

It takes minimal space and can elevate on several levels

Transfer carriers in the system provide compact buffer areas.

It also can divert trolleys in many different ways and also in various directions.

Different sections of the system can be run at variable speeds as well as forwards and backwards.

With the buffering technology Power & Free, an even balance is created in large production flows.

Power & Free buffers both on the driven track and on special buffer areas.

For example, before a robot station and during loading and unloading.

Clean, quiet and oil-free
Effective installation
Flexible and modular
www.ocssystem.co.uk