How to Replace Crankshaft Position Sensor 2006-2009 Mercedes-Benz E350

Buy Now!
New Crankshaft Position Sensor from 1AAuto.com http://1aau.to/ia/1AECS00101

This video shows you how to install a new crankshaft position sensor from TRQ on your 2006-2009 Mercedes-Benz E350. The crankshaft position sensor is an important component of any electronically controlled ignition system. The sensor provides the computer with data about the position of the crank shaft to properly adjust ignition timing. If the sensor in your vehicle is broken or malfunctioning, you may suffer poor performance, or get a check engine light.

This process should be similar on the following vehicles:
2006 Mercedes-Benz E350
2007 Mercedes-Benz E350
2008 Mercedes-Benz E350
2009 Mercedes-Benz E350

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obwT/1AXAA00013
• Trim Tool Set http://1aau.to/oamA/1AXXX00006
• T30 Socket
• Torque Wrench http://1aau.to/oaVB/1AXAA00044
• Gloves http://1aau.to/oaBZ/1AXSS00048
• Safety Glasses

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.