Dana Spicer Jeep JL JK JT Ultimate Dana 60 Front Axle Specs And Overview

Ultimate Dana 60 Specs
1. Wheel Mounting Surface To Wheel Mounting Surface Measurement is 69 Inches.
2. Utilizes A Very Common Wheel Lug Bolt Pattern Of 8 on 6 ½
Stud Size Is 9/16 x 18.
3. Same bolt pattern as Dana 60 /70 And GM 14 bolt Rear Axles From The 1970’s, 1980’S. 1990’s and part of the 2000’s
4. Uses Warn Premium 35 Spline Locking Hubs
5. Brake Rotor Diameter is 14 inches / Uses A Massive Dual Piston Caliper. Your Stock Brake Hose Will Attach To The Caliper Included With The Ultimate 60.
6. ABS Brakes Can Be Retained Without A Re Program Of Your ECU Or ABS Components, Remove Your Stock ABS Sensor Form Original Axle And Re-Install On The Ultimate 60 Front Axle For Plug And Play Set Up.
7. Front ABS Tone Ring Is 52 Tooth
8. Axle Shafts Utilize Dana Spicer Massive 1550 Series U joint. Axle Shafts Are 35 Spline SAE-4340 Nickle Chromoly Shafts Inner and Outer.
9. Axle Bracketry High Strength ¼ Inch Thick Steel.
10. Axle Tube 3 ½ Inch O.D .37 Or 3/8 Inch Wall Thickness
11. All New Center Section Slimmed Down For Maximum clearance.
12. Choose From Eaton E locker / Or ARB Air Locker
13. Ports On Housing Set Up For Either Style Locker No Drilling or Tapping Required
14. Ring And Pinion High Pinion Reverse Cut Dana 60 10 inch or 256 MM / Ring and Pinion Ratios Available 3.73 / 4.10 / 4.88 / 5.38
15. Nodular Iron Thick Protective Differential Cover
16. 1350 Pinion Yoke U Joint Size. Stock Drive Shafts From The Transfer Case Will Need To Be Replaced. Dana Offers Bolt In Replacement Shafts.
17. Steering Components Are Not Included. Synergy Manufacturing JK Tie Rod and Drag Links Are Commonly Used.