Wireless Backup Parking Sensor installation guide

This is a step by step guide on how to install a wireless parking sensor system in the front and rear for any car.

If you haven't yet purchased this system click here to buy:
https://www.tadibrothers.com/products...

The system in this video is perfect for parking, backing up, and parallel parking.

Very easy to self-install and Tadibrothers gives you all the components needed to make the installation clean and reliable.

If you already have one of our systems here is what you need to do:

1. Place the display or speaker in the desired location (i.e. in front you’re your steering wheel or above your mirror)

2. Connect it a 12-volt power source (usually found under your dash)

3. Place the “Brain” of the wireless sensor system in a convenient location in your trunk (keep in mind that the sensor cables will feed into that box)

4. Install the sensors by distributing them evenly across your bumper and use the included drill bit to make holes in the vertical center of the bumper

5. Connect the brain to constant power source (red and black wires)

6. connect the triggers to the reverse and break light (White and White/Black)


For more tech support or assistance on buying this product
please don't hesitate to call us at 866-966-5550 or go to https://www.tadibrothers.com/