Скачать или смотреть Crosman Quest - installing a Charlie da Tuna GRTIII trigger

Crosman Quest - installing a Charlie da Tuna GRTIII trigger.
http://www.charliedatuna.com

My .177 cal. Crosman Qust came from Krale Schietsport in The Netherlands
http://www.krale-schietsport.nl

** Quote from Charlie da Tuna's website **

Unlike trigger mods, installing the GRT-III trigger blade is a very simple procedure and does not require removing the trigger from the gun. The GRT-III trigger is truly a drop in trigger. It can usually be done in ten minutes or less and requires a Phillips head screwdriver (or a #25 Torx screw driver in many Gamo's) and a small standard blade screwdriver in most cases and an Allen key that is provided.

It is very important to read the instructions that come with the GRT-III in their entirety before installation. Be very careful not to remove the wrong trigger pivot pins. The pins are pointed out in the instructions that you will receive when ordered.

** End Quote from Charlie da Tuna's website **

Hope this video I made proves to be of use to you.

Reading a manual is one thing, seing it being done makes understanding what's written in a manual a lot easier to comprehend.