Wiring the transformer based Schneider XW PRO and PDP

Part 2, Mounting and Wiring this awesome off-grid inverter!
This is a heavy, transformer based inverter made for off grid and on grid both. This makes it a hybrid inverter. The Schneider XW PRO 6848 is battery based for any nominal 48V battery including lithium Iron Phosphate (LiFePO4).

PDP stands for Power Distribution Panel. Schneider makes two models of the PDP for the XW PRO inverter. There is a small, and large PDP. Both come with one 250A circuit breaker as a battery disconnect, and some AC circuit breakers. Both have a means to connect the single 250A breaker to one inverter.

The small PDP is made for one inverter only. It takes up less room, and costs a little less than the full size. As of this video, it is about $650 which makes it a real bargain if you know for certain you only need one inverter. This mounts under the inverter.

The large PDP takes up a little more room than the small PDP. It mounts next to the inverter, and comes with a wire-way that mounts under the inverter. The large PDP can accommodate up to 3 inverters allowing you to expand your system over time. As of this video, it costs about $1,200. It's only worth it if you know you will want more than one inverter (now or in the future).

---------------------------------------------------------------------------

Signature Solar Affiliate Links:

Schneider XW PRO inverter: https://signaturesolar.com/schneider-...

Schneider PDP, Large: https://signaturesolar.com/schneider-...

Schneider PDP, Small: https://signaturesolar.com/schneider-...

Schneider kit with inverters, PDP, and charge controllers: https://signaturesolar.com/bndl-dc-co...

Complete Off grid kit: https://signaturesolar.com/complete-h...

Battery, 30.72 kWh, LiFePO4, EG4-LL, with cabinet and busbars: https://signaturesolar.com/eg4-ll-lit...

Schneider Bundle with Mini-PDP: https://signaturesolar.com/bndl-dc-co...

---------------------------------------------------------------------------
Amazon Affiliate Links:

SPD, Surge Protection Device: https://amzn.to/3U9YBWW

4/0 Lugs, UL: https://amzn.to/3SGwP3q

Wire Cutters: https://amzn.to/3sD0BLU

Wire Crimpers, Hydraulic: https://amzn.to/3gUUZtS

Service Entrance Connector: https://amzn.to/3FrNPXZ

Zip Ties, UL: https://amzn.to/3DF1ARX

Cable Tie Tool: https://amzn.to/3sIRXvs

Torque Screwdriver: https://amzn.to/3DS8nYR

Driver Bits for Electrical Terminals: https://amzn.to/3DIWS5L

“As an Amazon Associate I earn from qualifying purchases.”
---------------------------------------------------------------------------

Disclaimer:

Products in video may have been provided to David Poz, LLC at no cost for the purpose of the review. All views and opinions expressed are that of David Poz, LLC.

My videos are in no way intended to be instructional "how-to" lessons. I am simply documenting my project for informational purposes. Property damage, personal injury, or death may result, even when following manufacturer's instructions. I cannot be held liable for such damage or injury. It is YOUR OBLIGATION to ensure that you are complying with any local and federal laws as well as code and permit requirements.

David Poz, LLC