PiKVM Metal Case Edition

Project https://pikvm.org/
Source code https://github.com/pikvm/pikvm
Support project   / pikvm  

Timestamps:
0:00 - Introduction
0:08 - Remove MicroSD Card
0:30 - Connect CSI-2 Ribbon Cable to Pi
0:40 - Install HAT Spacers
1:27 - Stack the HAT on the Pi
1:42 - Insert CSI-2 Ribbon Cable in HAT (watch blue ends!)
1:49 - Insert USB-C bridge (check bag with ATX)
2:04 - Install into bottom of case
2:57 - Screw in Bottom case screws and bottom plastic spacers
4:22 - Attach OLED screen and top plastic spacers
5:23 - Screw in Fan (washers not needed)
7:10 - Attach Top of case and fan cable
8:05 - Tighten all screws
8:33 - Insert MicroSD Card
8:39 - Power on
9:13 - OLED & FAN must be enabled in OS!