Скачать или смотреть [E9] Hawk 250 Chain rubbing on tire, grind noise at times, chain guide alignment. enduro dual-sport

The chain on my hawk was rubbing on the knobbies on the tire. upon further inspection I found the chain guide to be so far off its was useless and probably the problem. I'll have to drive it a few times to be sure but the small test drive I took it did not hit. the chain also used to make a grinding noise once in a while. I think it was the guide pushing it off the sprocket... I also found that with 500 miles my chain was shot. It's a non O-ring chain but I would expect it to last a little longer. Ordered an O-ring chain!

Informational Hawk Videos:
-Original assembly of the Hawk is here: (   • [E1] $1300 Hawk 250 box bike motorcycle as...  )
-100 mile review: (   • [E16] RPS Hawk 250 100 mile review and rid...  )
-Re-jetted to a 110 Mikuni Main jet and shimmed up the needle jet:    • [E3] Hawk250 Carb Tuning on the Dual Sport...  
-RK O-ring chain 428so 130 links: (   • [E21] RPS Hawk 250 O-ring Chain install on...  )
-17 tooth front sprocket: (   • [E10] RPS Hawk 250 15 tooth to 17 tooth fr...  )
-Modified air box: (   • [E6] RPS Hawk 250 Airbox Mod and a little ...  )
-Re-aligned chain guide, Tire/ chain rub: (   • [E9] Hawk 250 Chain rubbing on tire, grind...  )
-Adjusted valves: (   • [E17] Hawk 250 valve adjustment. UPDATED G...  )
-Turn signal beeper cut, Under seat storage: (   • [E4] RPS Hawk 250 Stop the annoying turn s...  )
-Buritto tube install:    • [E23] Hawk 250 RPS Burrito tube installati...  
Oil change:    • [E24] Hawk 250 RPS Changing the oil. Dual_...  

WHERE TO BUY PARTS LIST:
Due to changing products, links, etc, If you want the product links, please go to www.motocheez.com and click the bike your looking for parts (upper right), this simplifies the links for all the parts I use and install on ALL my videos.


Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez
Instagram:   / motocheez  
Facebook:   / motocheez  
Web: http://www.MotoCheez.com
Music clips: