Current Tools Ez Sheave TEN Group

Introducing the new Current Tools Eze Sheave
The Eze Sheave are available in 300, 400 and 600mm diameter, all with 1800kg capacity.
Eze Sheave also have forged steel hooks with 25mm openings and 125mm wide aluminium sheaves with self lubricating bearings.
To unload the easy sheave, remove the spring clip from the tab located at the top of the yoke frame near the hook.
Always be sure to relieve any pressure on the sheave before removing the spring clip and lowering the connector bar.
Pull the connector bar out far enough to clear the tab and lower the connector bar out of the way.
Unload the cable, raise the connector bar back into position, insert the spring clip into the tab to secure the connector bar.
Before using the Eze Sheave, always be sure to close the connector bar and insert the spring clip.
Eze Sheave is available from TEN
For more information contact TEN on 07 3212 8999
www.tengroup.com.au