Knurling in onshape, CAD tutorial

Описание к видео Knurling in onshape, CAD tutorial

here is one of the few methods to get a knurled surface on a cylinder, the important steps here are,
1. Creating a helical curve with very few turns, make both clockwise and anticlockwise curves.
2.Drawing a triangle at the ends of the helical curve, the triangle can be at any one of the ends, make sure the midpoint of the base of the triangle is coincident with the helical curve.
3.Sweeping the triangle on both the helical curves.
4. Using circular pattern tool to create suitable numbers of sweeps surrounding the cylinder.
5. Using Boolean to subtract/remove the swept models from the cylinder.

Комментарии

Информация по комментариям в разработке

Похожие видео