Скачать или смотреть PVC Sports Flooring Installation

Before construction, the ground needs to be cleaned, leveled and pre-treated to ensure a flat and dense base. Then, professional marking tools should be used to precisely mark the laying reference line, guiding the subsequent positioning. According to the reference line, the PVC sports floor sheet should be pre-rolled and cut, paying attention to leaving expansion joints to accommodate thermal expansion and contraction, and allowing the material to stand still for 24 hours at the site to fully adapt to the environmental temperature and humidity. During the formal laying process, roll up one end of the floor sheet, thoroughly clean the back dust, then apply the special glue evenly on the ground; when the glue becomes transparent and viscous, precisely lay the floor sheet and immediately use a steel roller to roll it in both directions to eliminate air bubbles. Simultaneously, handle the problem of joint warping and overflow glue. After the main laying is completed, cut off the excess parts at the edges, use professional slotting equipment to reserve welding slots at the joints, fill in the welding rods for hot melt welding, and then remove the raised weld marks after cooling and solidification. Finally, conduct a comprehensive inspection of the floor's flatness, joint sealingity and overall visual effect to ensure it meets the acceptance standards.

Find out more: www.greenvalleyrubber.com
#factoryproducts #factoryfloor #factory #manufacturing #manufacture #manufacturer #supply #supplier #installation #install #installationvideo #pvc #pvcflooring #pvcfloor #sport #sportflooring #sports #flooring #flooringideas #flooringdesigns #floortile #floortiles #contruction #roll
#rolls