How to Replace Valve Cover 2008-2013 Nissan Rogue

Buy Now!
New Valve Cover from 1AAuto.com http://1aau.to/ib/1AEVC00097

This video shows you how to install a valve cover on your 2008-2013 Nissan Rogue.

This process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue

Tools you will need:
• Pry Bar http://1aau.to/oRs/1AXAA00020
• 10mm Wrench http://1aau.to/oT4/1AXAA00010
• 14mm Wrench http://1aau.to/oT4/1AXAA00010
• 10mm Socket http://1aau.to/oa5y/1AXAA00017
• 14mm Socket http://1aau.to/oboF/1AXAA00015
• 16mm Socket http://1aau.to/oboF/1AXAA00015
• 18mm Socket http://1aau.to/oady/1AXAA00043
• Air Compressor
• Trim Tool Set http://1aau.to/o8e/1AXXX00006
• Needle nose pliers http://1aau.to/oCh/1AXAA00051
• Needle nose pliers http://1aau.to/oCh/1AXAA00052
• Pliers
• Torque Wrench http://1aau.to/oaz8/1AXAA00044
• Block of Wood
• Gloves http://1aau.to/oW9/1AXSS00048
• RTV
• Safety Glasses http://1aau.to/oQj/1AXAA00343
• Sandpaper
• 5mm Hex Wrench
• Floor Jack http://1aau.to/oZX/1AXAA00068
• Rubber Mallet http://1aau.to/ogw/1AXAA00413

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.