Custom Sprinter Van Rocker Lockers. Extra Storage for the Van!

Sprinter Adventure Van Build Series Episode 16.5: In this installment of the Sprinter #VanLife Build we cover in detail the Rocker Locker Design and Install on our Sprinter 144. This little storage box showed up in our Electrical Phase II Video and we wanted to highlight it a bit more. This is made from 5052 Powder Coated Aluminum and we think it's by far the cleanest solution out there with no bolts showing from the outside for an OEM look.

You really have to hand it to the Agency 6 folks for coming up with this idea in the first place, it truly is genius. However, we are getting a bit fatigued by all adventure or overland gear being over the top with laser cut molle panels and detailing where it doesn't make sense. We also learned pretty quick that the door really needs a cam latch to suck it in and it needs to be placed slightly forward at the bend of the body panel. You can check out our Rocker Lockers solution here - https://farrframeworks.com/sprinter-v.... If you are interested please sign up for the waitlist.

** NOTE: We are not professional builders and this video is for entertainment purposes only. We base our decisions on our own research, decades of knowledge gained from building other things and always with an engineering mindset. You should always follow the manufacturers instructions, do you own research and ONLY attempt projects like this at your OWN risk.

** NOTE: Some of the links below are affiliate links and we receive a small commission for purchases products through those end points. We will never recommend a product we don't stand behind and use ourselves. Everything listed below we used for our own build and weekly, if not daily, for our other ventures. Thank you for your support!

Tools Used in this Video:
- Medium Internal Deburring Tool - https://amzn.to/3vORTzh
- Small Internal Deburring Tool - https://amzn.to/3Xnl73x
- Dewalt Cordless Drill - https://amzn.to/3xUAdml
- Starrett Center Punch - https://amzn.to/4d9g64h
- Drill Stop Kit - https://amzn.to/44pgveP
- 3/8" Chamfer Bit - https://amzn.to/3XoZaBa
- Mitutoyo Steel Ruler - https://amzn.to/3z10ccx
- Painters Tape - https://amzn.to/3VqpuZ9
- Stepped Drill Bit - https://amzn.to/3KN0Rku
- Ingersoll Rand 529 Air Saw - https://amzn.to/4ejhwd7
- Air Saw Blades - https://amzn.to/4b30rRD
- Angle Grinder - https://amzn.to/45s1ysS
- Flap Wheels - https://amzn.to/4ckFhQ4
- Hand File Set - https://amzn.to/3KJwgEe
- Sika Primer 207 - https://amzn.to/3KRUcW1
- Rustoleum Spray Paint - https://amzn.to/45IGWNr
- 2K Raptor Bed Line (what I would use next time) - https://amzn.to/3VoYaud
- Rust Bullet - https://amzn.to/3KJaAsb
- Small Applicators - https://amzn.to/3x8c8sA
- 11/32” Wrench - https://amzn.to/3RpKhuv

Video & Sound Equipment Used to Make this Video:
- SE Electronics Neom USB Microphone - https://amzn.to/3Aac34P
- Rode PSA1 Mic Stand - https://amzn.to/3H96FmR
- DJI Wireless Microphone (HIGHLY RECOMMENDED) - https://amzn.to/3fK0DhZ
- Sony FE 16-35 F4 Lens - https://amzn.to/3ClzhI8
- Sony FE 85 F1.8 Lens (super crispy close-ups) - https://amzn.to/3DRMXeu
- SanDisk 2TB Extreme Portable SSD - https://amzn.to/47GXpSw
- DJI Osmo Pocket 3 Creator Combo - https://amzn.to/3VJWXiv

Video Contents:
0:00 - Intro
0:56 - Moonraker Design Co
1:17 - Templating the Holes
3:42 - Cutting the Opening
5:49 - Prep & Painting
6:56 - Installation
9:23 - Wrapping Up
10:03 - Outro

Music:
Music from Uppbeat (free for Creators!):
https://uppbeat.io/t/d0d/everlasting
License code: BE1ERXTGCVIFWYI2
https://uppbeat.io/t/d0d/everlasting
License code: BE1ERXTGCVIFWYI2
https://uppbeat.io/t/dan-phillipson/i...
License code: JBTQHJQXBMKMMCYY