Suzuki Jimny Restoration Ep. 2 - Suspension Lift Kit

In this video we install a 40mm lift kit in our 2008 Suzuki Jimny Sierra, which massively improves the handling.
Link to previous episode - basic service -    • Suzuki Jimny Restoration Ep. 1 - Basi...  

Model – 2008 Suzuki Jimny Sierra JLX JB43 (SN413 T6)
Parts installed:
TDC-836 x2 = Front 40mm raised tough dog coils, suit alloy bar
TCD-837 x2 = Rear 40mm raised tough dog coils
BD1133TB = Front pair of 2 tough dog shock absorbers (suit lift)
BD1192TB = Rear pair of 2 tough dog shock absorbers (suit lift)

Jump to Section:
00:00 Introduction
00:30 Raising car and removing wheels
01:47 Removing front shock absorber
02:38 Removing front sway bar link and brake caliper
05:43 Lowering axle and removing front coil spring
06:54 Replacing front coil spring and shock absorber
08:12 Reinstating wheels
08:29 Raising rear of car and removing wheels
09:43 Removing rear shock absorber
10:38 Disconnecting flexible brake hose E-ring connector
10:57 Replacing rear coil spring
12:17 Installing new rear shock absorber
13:04 Lowering the car and tightening all lower shock absorber bolts/nuts
13:57 Test drive, height check and conclusion

Tools used:
Metric socket set – 14, 17, 19mm
Metric open ended spanners – 14, 17mm
Torque wrench
Jack and 2x jack stands
Wheel chocks
Flathead screwdriver
Hammer
WD-40 (or other penetrating fluid)

Disclaimer: At 2nd Gear Low, we love working on cars, but we are not trained mechanics. We like completing maintenance and modifications to all sorts of cars and filming it for your entertainment, but we can’t promise that you won’t harm yourself, someone else, your car or your warranty by trying this. Talk to a qualified mechanic if you are ever unsure about any part of a job that you choose to try yourself.