How to Replace Front Wheel Hub and Bearings 2010-2013 Kia Forte Koup 2.4L L4

Buy Now!
New Wheel Bearing from 1AAuto.com http://1aau.to/ib/1AAXX00149
New Wheel Hub from 1AAuto.com http://1aau.to/ib/1ASHF00418

This video shows you how to install a front wheel bearing & hub on your 2010-2013 Kia Forte Koup 2.4L L4. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.

This repair was done on a 2012 Kia Forte Koup SX 2.4L Coupe 2-Door FWD Automatic and the process should be similar on the following vehicles:
2010 Kia Forte Koup
2011 Kia Forte Koup
2012 Kia Forte Koup
2013 Kia Forte Koup

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obTu/1AXAA00013
• Phillips Head Screwdriver http://1aau.to/obTu/1AXAA00013
• Pry Bar http://1aau.to/oags/1AXAA00020
• 10mm Wrench http://1aau.to/oapm/1AXAA00010
• 17mm Wrench http://1aau.to/oapm/1AXAA00010
• 12mm Socket http://1aau.to/octF/1AXAA00015
• 14mm Socket http://1aau.to/octF/1AXAA00015
• 17mm Socket http://1aau.to/octF/1AXAA00015
• 19mm Socket
• 21mm Socket
• 32mm Socket http://1aau.to/oeX/1AAST00003
• Brake Caliper Hanger http://1aau.to/ooL/1AXAA00439
• Press
• Trim Tool Set http://1aau.to/oaIC/1AXXX00006
• Ratchet http://1aau.to/ocs6/1AXAA00016
• Socket Driver
• Socket Extensions http://1aau.to/octF/1AXAA00015
• Torque Wrench http://1aau.to/obuG/1AXAA00044
• Paper Towels http://1aau.to/oWE/1AXSS00035
• Hammer
• Jack Stands http://1aau.to/oazn/1AXAA00065
• Pick http://1aau.to/oaby/1AXAA00037
• Punch
• Wheel Chocks
• Wire Brush http://1aau.to/oA3/1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.