TNB Naturals Enhancer Experiment The First 24 Hours of Data is in

TNB Naturals Enhancer Experiment The First 24 Hours of Data is in

To jump right to the results skip to 10:40

A lot of you have been asking for this series to start, well it's here, we have the first 24 hours of data.
We start out by speaking a little bit about the TNB naturals The Enhancer co2 product and how we are going to run this experiment. We are going to use a small 4x2 foot x 60-inch tent. The product is rated for a 12x12x12 foot space so this should be nothing for the Enhancer to raise the co2 to levels in the tent to the 2000ppm to 3000ppm range. We will have to wait until the end of the video to see the results for the first 24 hours.

We used the Perfect Prime Co2 detector to run this test. We have been using this meter for the last several months and have found it to be a really reliable unit. With the data logging ,feature it really makes it easy to track our levels and makes it the best choice for this experiment. I will leave a link where you can find this air quality meter below.



 We were given a promotional code for 10% off at the link below.
https://perfectprime.com/products/co2390
dwp10
At the end of the video, we cover the data from the SD card. I took all of that data and make a chart so that you could visualize the increase and decrease in the tent