AirScrape® - Dust Free, Contactless Conveyor Skirting Solution

AirScrape® is a highly effective contact-free conveyor skirting and sealing system that acts as a side seal, suspended over the conveyor belt. With its unique diagonal arrangement of hardened lamellae, air is led from the outside into the middle of the belt, creating powerful air suction. The material movement together with the moving belt support increases the suction effect enabling fine dust particles to remain in the conveyor section. Additionally, coarse materials pushing outward are led back to the middle of the belt by the lamellae which can significantly minimise spillage.

The AirScrape® innovative and patented design delivers a tri-fold positive effect that includes material spillage and dust formation reduction particularly at critical transfer points. Additionally, due to the skirting and sealing system’s ability to hover freely above the conveyor belt, skirt friction and belt damage can be eliminated, service life of other conveyor components can also be extended.

Dimensions
AirScrape® is available in pairs of left and right hand side 2 metre inter-connectable pieces to form any required length and is available for belt overhangs (G) of 55 - 143 mm in the sizes Large, Medium and Small.

Installation
AirScrape® is installed using spacers, floating the blades 0 - 1 mm freely above the belt and is attached to the outside of the chute by lifting tensioners via a simple screw system. It is longitudinally and laterally adjustable to follow the contours of conveyor belt rollers and the belt trough angle.

More Info:
https://kinder.com.au/products/airscr...

Contact Kinder Australia
P: +61 3 8587 9111
E: [email protected]
W: kinder.com.au