FX Wildcat MKIII Reassembly - FX Masterclass

Ernest Rowe from FX Airguns takes you through the steps on how to reassemble your FX Wildcat MKIII.

Note: Reassembly measurements are critical and need to be measured to ensure your gun works properly.
1st measurement - 7:15
2nd measurement - 12:10

Tools needed:
11mm Open End Wrench (milled down)
15mm Open End Wrench
T-20 Torx Bit Screw Driver
Calipers
2mm Allen Wrench
3mm Allen Wrench
4mm Allen Wrench
5mm Allen Wrench
Pusher Tool - https://910airguntuningandrepairsllc....


For a detailed schematic click here https://fxairguns.com/wp-content/uplo...
To order parts or speak with a certified FX Technician, call or email:
[email protected]
(866) 639-0772
If you have a specific tutorial you would like to see from Ernest, please leave a suggestion in the comment section below.