DIY: BMW E39 HVAC Panel Removal

Video tutorial on how to remove the HVAC control panel on a BMW E39. A similar procedure possibly applies to other BMW models as well. It is also required that the cup holder does need to be removed as well. This particular tutorial was done on a 1997 BMW 540i E39.

Website: http://4diyers.com
Facebook:   / 4diyers  
Google Plus: https://plus.google.com/+4DIYers
Twitter:   / 4diyers  
Instagram:   / 4diyers  
Tumblr:   / 4diyers  
Pintrest:   / 4diyers  

Cup holder removal:    • DIY: BMW E39 Front Cup Holder Replace...  
HVAC panel button replacement:    • DIY: BMW E39 HVAC Button Panel Replac...  

Tools/Supplies Needed:
-phillips screwdriver
-standard/flat screwdriver

Procedure:
-remove the cup holder
-place your hand inside the cavity and push outward on the hvac panel, starting with the passenger side first
-once it pops out, push it back until the spring clip touches the open, now push outwards on the driver's side
-once the spring clip is released, pull the unit straight out
-now remove the 4 plug connectors on the bottom side
-please refer to the video to determine how each connector is removed

Thank you to all those who watch my videos and support my content. Don't forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week!

© 4DIYers 2013
All Rights Reserved
No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.